1550nm Internal Optical Transmitter

Item No.: VTA-1510D
VTA-1510D indoor series optical transmitter is an externally modulated optical transmitter using a 1550nm DFB laser. The product uses a highly linear and low noise distributed feedback laser (DFB) and self-developed pre-distortion processing technology to ensure excellent performance indicators and high overall machine reliability; it has a working frequency bandwidth, large transmission capacity, and small non-linear distortion Features: automatic optical power control circuit, automatic laser temperature control circuit, laser protection circuit and laser slow start circuit can effectively extend the working life of the laser and ensure the stability of the output optical power when the laser is working for a long time.
Description Features Technical Parameter

1.Frequency Range: 45~862MHz.
2. RF- input level: 75dBμV~85dBμV.
3.Out wavelength: 1550nm ± 10mW
4.Out Optical power : ( 6、8、10mW )
5. ATC/APC circuit makes the stability of the functions.
6. MCU monitor the status , LCM/VFD display the status, customer can test parameters at any time.
7. Large area heating-fast,improve the reliability of the equipment.  
8. RF input point and power supply with lightning protection,ensures safety.
9. 19 inch 1U design for installation.

The imported famous brand low-noise, high-power, high-reliability 1550nm DBF laser and LiNbO3 external modulator with pre-distortion processing function are selected. The excellent non-linear index provides strong technical support for CATV signals to achieve long-distance transmission. Amplifier cooperation can well solve the large area coverage of users of HFC networks.

The MCU microprocessor circuit, SBS suppression circuit and ALC automatic power control circuit in the product can be used to accurately monitor all the working state parameters of the laser. Each state parameter can be directly obtained by the LCM / VFD on the front panel or remotely through the RS232 serial interface. monitor.

AGC condition
1. The default condition is AGC (the best condition)
2. AGC Range 75dBuV~85dBuV
3. AGC is automatically controlled by internal circuits
MGC Adjust
1. The MGC Adjust rotates counterclockwise ,RF OUT level increase
2. The MGC Aduust rotates clockwise, RF OUT level decreases
3. It is only useful if the MGC indicator light is on
NOTE: Users are not advised to adjust as they may cause image quality problems
1. The RF ADJ rotates counterclockwise ,RF input level decreases
2. The RF ADJ rotates clockwise, RF input level increase
3. RF input level ensures at 75dBuV~85dBuV

Technical Parameter
Wavelength nm 1550±5
Output power dBm 2~10
Optical return losee dB ≥60
Bandwidth MHz 47~865/1000
Input level dBuV 75~85
Flatness dB ±0.75
Input inpedance Ω 75
RF return losee dB >16
CNR dB ≥51
CSO dB ≥60
CTB dB ≥65
Power V 90~265AC
Working temp 0~50
Storage temp -20~85
Max Distance KM 20
Send your message to us